There are many benefits for the average household of having an air source heat pump installed. This type of renewable heating system provides better energy efficiency compared to traditional gas boilers and other heating systems, but how much is running a heat pump likely to cost a typical household?
The average heat pump operates at higher efficiency levels usually in excess of 300% – compared with around 90%+ for a new gas boiler – meaning that annual heating costs will usually be low for a household running an air source heat pump.

In the example above, the required 4,000 kWh at a price of £0.2573 (based on the July 2025 price cap) would cost £1,029 to run annually.
How much electricity does an air source heat pump use?
An air-source heat pump is a form of renewable energy technology using heat from the outside air to provide heat and hot water inside a home. Its technology works essentially like a refrigerator in reverse.
The initial heat pump installation is just one part of the costs associated with heat pumps. When weighing up their use, the running costs of the electricity required to operate the heat pump technology also have to be taken into consideration. How much electricity an air source heat pump uses, and therefore the air source heat pump running costs, will not be fixed and will vary between installations, based on two main interrelated factors.
- Heat demand – this varies between properties and refers to the level of heating power needed to keep a property at the optimal temperature.
- Air source heat pump efficiency – the ability of an air source heat pump to effectively heat a house using the minimal amount of electricity possible. It is recorded as the Coefficient of Performance (CoP).
Heat demand
Heat demand has an obvious impact on the running cost of air source heat pumps. To calculate actual heat demand, you should consider what is needed to heat the property, how many rooms there are, and what the desired temperature is. Generally, the more heat you require, the bigger the heat pump needed, and the higher the cost will be of operating the system because of the volume of electricity required to operate the unit.
Air source heat pumps efficiency (CoP)
The efficiency of an air source heat pump also impacts the overall cost of running your heating system. A heat pump installed with an underfloor heating system will be more efficient than one using conventional radiators as underfloor heating requires the heat pump to work less hard in order to generate the desired indoor temperature.
Another important factor with a heat pump system is the level of insulation in the property in which it is being installed. If you don’t have sufficient insulation, this will increase the demand for heat, and therefore require more electricity. The more heat the property can retain, the lower the running cost of heat pumps because they don’t have to work as hard.
Also, where you locate your air source heat pump can also affect its efficiency. Ideally, you should select an area that is free from blockages and preferably well exposed to sunlight, so it will be more effective in creating heat.
In what ways can you lower your electricity costs to run your heat pump?
If you are using an air source heat pump as an alternative to a gas boiler to heat the home, your gas consumption will fall but your electricity usage will inevitably increase, though your overall energy bills should reduce as a result. Fortunately, there are some ways you can limit the electricity your heat pump consumes.
Avoid changing the set temperature
When you regularly turn the temperature up or down to regulate the temperature in your home, the heat pump will use more power. It would be beneficial to set the thermostat to a certain temperature and try not to alter it, as your system will require less power to maintain a consistent temperature .
Check the water heating temperature
If this temperature is set at too high a level, your heat pump will be using more electricity than it needs to to get your water to the right temperature. You can lower the temperature of the water to 40 degrees or lower, which will still be enough to heat your home.
Properly maintain your heat pump
Inadequate maintenance of your air source heat pump could result in an increase in your energy bills, sometimes by as much as 25%. Filters that are dirty or blocked restrict airflow through the system, affecting performance. Your heat pump should be serviced every year.
How much does it cost per hour to run a heat pump?
An 2.2kw air source heat pump will create roughly about 11kw worth of hot water for radiators and use 2200 watts from the mains.
With a cost of 25.73p per Kwh (based on average prices under the Energy Price Cap as from July-September 2025), running this system would cost you around 56.61p per hour in electricity, or £4.53 for an 8 hour ‘running period’.
However, a bigger central system consuming about 11kw would be much more expensive, costing nearly £2.83 per hour to run, but this will create enough heat to warm an average-sized three-bedroom home. However, this is still likely to save a household significant amounts on its running costs with a heat pump compared to a traditional gas boiler.
An average property typically requires approximately 12,000 kWh of heat per year

How can you save on ASHP running costs?
You can follow the below steps to increase the efficiency of your air source heat pump and therefore minimise the costs of running your system.
- Install double or triple glazing windows to prevent heat loss
- Install cavity wall insulation (if your property has cavity walls) to stop heat from escaping through your walls
- Have loft insulation installed to restrict heat loss through your roof
- Keep windows closed as much as possible to avoid heat loss
- Shop around for a cheaper electricity supplier
- Install solar panels and a solar battery so you can generate and store your own free electricity
- Fit bigger radiators (oversized heat pump compatible radiators are usually more effective)
- Install underfloor heating
- Have an annual service of your heat pump system to maintain efficiency
- Install one of the best air source heat pumps to ensure maximum efficiency
- Consider a ground source heat pump as an alternative as these have a higher efficiency level (CoP) than the average air source heat pump
Heat pump running cost conclusions
Households investing in heat pump technology will benefit from improved heating efficiency compared to their current heating system though their levels of insulation will need to be of a decent standard to fully benefit from the heat generated. The low running costs, including minimal maintenance, make them a preferred option for many households who are able to accommodate a heat pump in their property.
Added to this is the fact that running a heat pump helps reduce a household’s carbon footprint, so there are savings for both the environment and your pocket. If you combine your heat pump with a solar panel set up of sufficient size, you could largely eliminate your electricity running costs altogether.
While the initial cost of heat pump installation may be off-putting for some, with grants of up to £7,500 available under the Boiler Upgrade Scheme and 0% VAT payable by homeowners on all heat pump installations until 2027, there has never been a better time to make the move to heat pump technology. Heat Pumps UK can help you find local installers offering the best air source and ground source heat pumps deals, so get a free no-obligation quote today.
(Article updated to reflect average electricity prices under the Energy Price Cap as from July 2025)


